Built in robe & cabinets to be made/fitted at home based business.

• Cabinet Making
→
• Kitchen Cabinets
→
• Cabinet Makers Quote Request #258624

Freddy requested 3 quotes from Cabinet Makers in Noble Park North

  I am after a cabinet maker who can build and fit some floor and overhead cabinets.

The cabinets required are as follows...

KITCHENETTE:
- 1 floor cabinet with 2 sliding doors. Bench top & sink provided by customer. (Approx. 1270w x 950h x 470d)
- 1 small overhead wall cabinet* with 2 sliding doors. (Approx. 650w x 650h x 300d)
- 1 freestanding cabinet on castors (suitable for microwave oven) with slide out tray beneath benchtop, 2 shallow drawers & 1 small cupboard with adjustable shelf below. (Approx. 500w x 750h x 480d)

OFFICE:
- 1 L-shaped overhead wall cabinet* with sliding doors and no internal shelving. (Long side - Approx. 2730w x 385h x 400d, Short side - Approx. 1480w x 380h x 300d)
- 2 freestanding cabinet units on castors, each with 2-3 standard sized drawers and 1 filing cabinet drawer
- 1 L-shaped desk with a 560w x 120h x 350d slide out keyboard drawer in inner corner. I would like the desk to be able to be dismantled for easier transporting.(Long side - Approx. 1900w x 750d, Short side along back edge - Approx. 1700w x 560d) Height of desk will be determined by height of 2 cabinets, as they will both stay beneath desk. May require hutch removable section to sit on desk too.
Note that desk will not be required until a few weeks after cabinets.

STUDIO:
- 1 built in robe* with 2 timber sliding doors, solid enough to be able to support weight of approx. 15kg spread across on front sliding door, as I may require to hang/mount items to it. Facility for at least 1 adjustable shelf inside, able to carry weights of up to 60kg. (Approx. 1600w x 2420h x 580d inside behind door)

OVERHEAD COMPARTMENT CABINET:
- 1 small cabinet with single top hinged door, which can remain open on its own. (Approx. 770w x 250h x 400d)

NOTE: The walls in the kitchenette, which also separate it from the office, do not meet at perfect 90 degree angles in the corners, so it would be best to measure these yourself.

Items above marked with * indicate the ceiling is on a decline where these cabinets are to be installed.

I would like all cabinets to be laminex, except for built in robe doors, which I would like to paint. Laminex colour to be decided once I know which options I have for colours.

Please reply with your email address if you would like photos of all the areas requiring cabinets.

Thank you, and I look forward to hearing from you.