Jobs Board Cabinet Making Jobs in Balwyn North Cabinet Making Jobs in Balwyn North

I have an existing kitchen cabinet cavity to suit oven 1100 high, oven now removed, and require cabinet adjusted to suit new oven 888 high, width to stay the same. Finish of front panel fill in to... I have an existing kitchen cabinet cavity to suit oven 1100 high, oven now removed, and require cabinet adjusted to suit new oven 888 high, width to stay the same. Finish of front panel fill in to match existing wood veneer- American Oak. There are existing drawers at the top and bottom of the oven cavity.

I need 10 cupboard doors in white 2-pack high gloss finish W 395mm x H 1940mm. I need 10 cupboard doors in white 2-pack high gloss finish W 395mm x H 1940mm.

master bedroom cabinet : 4m(w) x 3.2m(H) Kitchen Cabinet : revanish and change the internal shelf master bedroom cabinet : 4m(w) x 3.2m(H) Kitchen Cabinet : revanish and change the internal shelf

Refurbish or renovate kitchen Refurbish or renovate kitchen

Need Cabnetry to be built in BBQ area and install subdtrieght on top ready for Ceasar stone . Need cupboards built and Porifera doors plus sub straight ready for Ceasar stone Need Cabnetry to be built in BBQ area and install subdtrieght on top ready for Ceasar stone . Need cupboards built and Porifera doors plus sub straight ready for Ceasar stone

Built on cupboards, 6-8 doors in vinyl wrap with glass inserts and glass top. Also matching kitchen splashback. Built on cupboards, 6-8 doors in vinyl wrap with glass inserts and glass top. Also matching kitchen splashback.

2 cabinet drawers and slides need replacement 2 cabinet drawers and slides need replacement

custom made kitchen cabinets custom made kitchen cabinets

Existing white melamite (mine) doors have deteriorated don't want to replace all the other doors, so these need to be replaced with plain white doors. 75cm high and from 37 to about 45 cm... Existing white melamite (mine) doors have deteriorated don't want to replace all the other doors, so these need to be replaced with plain white doors. 75cm high and from 37 to about 45 cm wide.They are about i/2 inch thick can measure up if neededor drop them in to you to exactly replicate they sit under sink so slight colour variations not issue as they were originally installed in 1990s

Install a small pre packed Bunnings kitchen into a property in Balwyn North. Install a small pre packed Bunnings kitchen into a property in Balwyn North.

Hello, I have an existing caesarstone bathroom benchtop that is currently in place on a vanity unit. I have removed the old sink and the vanity unit is waiting to be placed into a new bathroom.... Hello, I have an existing caesarstone bathroom benchtop that is currently in place on a vanity unit. I have removed the old sink and the vanity unit is waiting to be placed into a new bathroom. I need the existing cut out section in the caesarstone (85mm x 85mm) to be enlarged to be able to install a new counter-top sink (with overflow).

To make as per professional drawings. 1. Reception desk and double return, gloss laminate exterior panel, white melamine computer boxes x 2, 38mm laminate bench tops, open under. 2. two print room... To make as per professional drawings. 1. Reception desk and double return, gloss laminate exterior panel, white melamine computer boxes x 2, 38mm laminate bench tops, open under. 2. two print room 33mm laminated work benches with 25mm adjustable shelving under. 3. Small white melamine cupboard into existing wall cavity with doors to be painted (separate job) 1 adjustable shelf. 4. Three 38mm white laminate floating wall mounted shelves.

Chip on edge in Kitchen bench needs repair only one year old kitchen Chip on edge in Kitchen bench needs repair only one year old kitchen

Old kitchen benchtop needs to be relaced for new laminated bechtop Old kitchen benchtop needs to be relaced for new laminated bechtop

I require the build of an L-shaped laminate benchtop of 2415mm length on one side, and 1620mm on the short side (total dimension). The depth of the benchtop should be 620mm, and the thickness... I require the build of an L-shaped laminate benchtop of 2415mm length on one side, and 1620mm on the short side (total dimension). The depth of the benchtop should be 620mm, and the thickness required is 45mm. The detail of each piece is as follows: Piece 1 - 2415mm x 620mm x 45mm with sink cutout and female mason's mitre join Piece 2 - 1000mm x 620mm x 45mm plus male mason's mitre join (join is outside the dimension specified). Colour or material to be of Formica Amaretto Stone or similar (similar colour to Caesarstone Almond Rocca but in laminate) Installation can be quoted separately as I may be able to install myself. The dimesion must be specific as I am renovating an existing kitchen. Appreciate immediate quote as I need to know if I am going to proceed with the build or not depending on budget.

room requires boxing over exposed concrete retainign walls, plastering of walls and floating flooring to be installed. room requires boxing over exposed concrete retainign walls, plastering of walls and floating flooring to be installed.

This is for repair only. This is for repair only.

Small chip about 3mm. I still have the chip. Needs to be repaired in the edge of our caesar stone bench top. Would also like to get a quote on fixing chips in another caesar stone benchtop that... Small chip about 3mm. I still have the chip. Needs to be repaired in the edge of our caesar stone bench top. Would also like to get a quote on fixing chips in another caesar stone benchtop that we have. We never got around to fixing it..

I have laminated kitchen cabinet doors and panels which I want replaced. Existing frame, shelves and stone benchtop to remain. I have laminated kitchen cabinet doors and panels which I want replaced. Existing frame, shelves and stone benchtop to remain.

I require 3 base kitchen cabinets with doors to be installed. 800mm and 400mm width with a laminate benchtop. Hole needs to be cut for sink. I also require 3 wall cabinets, with same... I require 3 base kitchen cabinets with doors to be installed. 800mm and 400mm width with a laminate benchtop. Hole needs to be cut for sink. I also require 3 wall cabinets, with same measurements as base cabinet to be installed above base cabinets.

I require built in robes to be built in 3 bedrooms. All full length with sliding doors. 2 rooms have no robes. One has an existing robe which needs to be pulled down and removed. Quotes required. I require built in robes to be built in 3 bedrooms. All full length with sliding doors. 2 rooms have no robes. One has an existing robe which needs to be pulled down and removed. Quotes required.

This is the first of three jobs that I need done and the most urgent! The shell of the existing built in wardrobe is fine, the inside needs to be re done, new draws, shelves and hanging space.... This is the first of three jobs that I need done and the most urgent! The shell of the existing built in wardrobe is fine, the inside needs to be re done, new draws, shelves and hanging space. The doors need to be fixed or replaced as they don't shut properly. Please note budget for this 1st job only. The second job is a very large build of a special beautiful library/shelving/cabinet done in art deco style, I am interested in using re -cycled veneer timber from old art deco wardrobes as well as new materials. A unique piece in a grand art deco ballroom!

Fridge doesnt fit into exsting kitchen. Need to change the cabinets on one side of kitchen, re-using materials where possible, to get fridge in and retain pantry and storage. Fridge doesnt fit into exsting kitchen. Need to change the cabinets on one side of kitchen, re-using materials where possible, to get fridge in and retain pantry and storage.

2 Bookshelves in Black or Dark Grey Approx ... Width: 120 cm Depth: 28 cm Height: 237 cm with 6 adjustable shelves like BILLY system from Ikea Built - In Wardrobe Approx... Width:... 2 Bookshelves in Black or Dark Grey Approx ... Width: 120 cm Depth: 28 cm Height: 237 cm with 6 adjustable shelves like BILLY system from Ikea Built - In Wardrobe Approx... Width: 140 cm Depth: 61 cm Height: 236 cm with railings and shelves similar to Ikea PAX BIRKELAND/HOPEN styling in light colours

Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office

Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office

Replace existing 450 mm deep bank of kitchen cupboards with 600 mm deep, incorporating new stove, sink and dishwasher. Large built in sold wood hutch will need to be moved to a different position... Replace existing 450 mm deep bank of kitchen cupboards with 600 mm deep, incorporating new stove, sink and dishwasher. Large built in sold wood hutch will need to be moved to a different position to accommodate the extra depth. Also replace old laminex benchtops on two hutches with solid timber benchtop. We do not want a new kitchen, just some modifications to the existing kitchen.

Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office Remove solid wood built in shelving and wardrobe in office space and replace with built in desk and appropriate office cupboards and shelving to suit home office

The existing in built wardrobe has 3 doors. currently: --behind door 1 (left) are 3 shelves approx 40cm apart vertically ie 4 open spaces with the floor being the base of the 4th space --behind... The existing in built wardrobe has 3 doors. currently: --behind door 1 (left) are 3 shelves approx 40cm apart vertically ie 4 open spaces with the floor being the base of the 4th space --behind door 2 (middle) are 3 shelves approx 40cm apart vertically ie 4 open spaces with the floor being the base of the 4th space --behind door 3 (right) is full height hanging there is a shelf at head height which runs the width of the wardrobe. this should remain. all internals are white mdf style material & this should remain. all in very good condition. aim is to end up with 2 doors of full height hanging & 1 door with 3 large drawers and one open space at the base. ie the desired configuration is: --door 1 - top 3 shelves should be converted to 3 large drawers. 4th open space at bottom can remain as is. either retrofit existing cabinetry with drawers or remove/replace - happy to look at either option. --door 2 - remove all cabinetry & change over to full height hanging --door 3 - leave full height hanging & make open to through to door 2 (ie one big full height hanging space with new double length hanging rail needed). no idea on correct budget, have guessed only. hopefully lower!

an existing built in robe, which needs 2 new doors fitted. the door opening does not reach up to the ceiling but the inside of the cupboards do so would like two new doors built for ease of access.... an existing built in robe, which needs 2 new doors fitted. the door opening does not reach up to the ceiling but the inside of the cupboards do so would like two new doors built for ease of access. would also like a strong shelf built inside for storage... i will then need a very strong clothes hanging rack put into the cupboard underneath the shelf..