Jobs Board Cabinet Making Jobs in Randwick North Cabinet Making Jobs in Randwick North

Burn mark on 40cm section of laminate kitchen bench top Burn mark on 40cm section of laminate kitchen bench top

Wardrobe is to be: 1524mm wide - divided into 3 sections each 508. 2 sections have 3 drawers each 508 wide with a hanging rail above. The third section is shelved (adjustable) 3077mm. Height... Wardrobe is to be: 1524mm wide - divided into 3 sections each 508. 2 sections have 3 drawers each 508 wide with a hanging rail above. The third section is shelved (adjustable) 3077mm. Height divided into main wardrobe (approx 2m - tbc) and separate cupboards on top with single shelf, also with sliding doors. 630mm deep 3x sliding doors plus 3x smaller sliding doors on top section Fits in corner of room so only needs 1 side 29mm mdf with federation style panel doors Whisper white / white drawer handles Can provide sketch if required for quote purposes

I would like to get a basic quote for installation of two custom floor-to-ceiling cupboards to fit into alcoves in a hallway. Both are approximately 3300 mm tall (the ceilings are about 11 feet).... I would like to get a basic quote for installation of two custom floor-to-ceiling cupboards to fit into alcoves in a hallway. Both are approximately 3300 mm tall (the ceilings are about 11 feet). Materials should be 2-pack polyurethane, white colour MDF. First cupboard: approx 1350 mm wide, 600 mm deep, 3300 mm high. 6 shelves spaced 400 mm from floor (larger space at top). Two hinged doors. Second cupboard (over a laundry alcove) Same materials as above, two hinged doors. approx 930 mm wide, 750 mm deep, 3300 mm high. Four shelves, first shelf at 1200 mm from ground, last at 2400 mm. Please give me a ballpark quote for manufacture and installation for these two cupboards. Site is in Randwick, NSW, 2031

To supply and install angled cabinet to match existing storage cabinet with division and adjustable shelves to supply and install wardrobe to match existing in other bedroom with 1 set of drawers... To supply and install angled cabinet to match existing storage cabinet with division and adjustable shelves to supply and install wardrobe to match existing in other bedroom with 1 set of drawers with ball bearing runners to supply and install shaving cabinet

Create a storage/home office/work station in a confine area. As the area is in open plan apartment combining lounge and dining I want the flexibility of closing off the unit whilst not intruding... Create a storage/home office/work station in a confine area. As the area is in open plan apartment combining lounge and dining I want the flexibility of closing off the unit whilst not intruding into the leaving space. Bi Fold system closes with chair tucked under bench.

I want a desk and shelving built on to the wall of my study. The shelving may include some cupboards as well. I want a desk and shelving built on to the wall of my study. The shelving may include some cupboards as well.