Jobs Board Cabinet Making Jobs in Vermont South Cabinet Making Jobs in Vermont South

1)Dismantling existing kitchen with cesar stone bench tops (all appliances & range wood ,sink already removed ) from Glen Waverley home & transporting up to Vermont Sth home 5 to 7 minutes drive.... 1)Dismantling existing kitchen with cesar stone bench tops (all appliances & range wood ,sink already removed ) from Glen Waverley home & transporting up to Vermont Sth home 5 to 7 minutes drive. 2) Dismantling existing kitchen with laminated bench tops & some appliances from Vermont Sth home 3)Installing transported kitchen with appliances,range hood,sink etc. in-place (redesign if required ) 4) layout of both kitchen are same.

Manufacture and delivery of components as listed below: Floor Base Cabinets: 1 off Fridge Cabinet 2200Hx800Wx600D including slimline wall cabinet 800Wx360H above fridge space. 1 off Corner... Manufacture and delivery of components as listed below: Floor Base Cabinets: 1 off Fridge Cabinet 2200Hx800Wx600D including slimline wall cabinet 800Wx360H above fridge space. 1 off Corner Pantry unit 2200Hx1000Wx1000W (single door 600W). 1 off Oven Tower unit (for 890mm double oven) 2200Hx600Wx600D with slimline wall cabinet 360H plus microwave box 430H plus single drawer unit 300H. 2 off tall end panels 2200Hx600D. 1 off three (3) drawer base cabinet 900Wx600Dx720H. 1 off single door base cabinet 300Wx600Dx720H. 1 off 2 door Corner base cabinet 900Wx900Wx720H. 1 off double door base cabinet 600Wx600Dx720H. 1 off single (300mm) door blind corner base cabinet 600Wx600Dx720H. 2 off three (3) drawer base cabinets 600Wx600Dx720H. 1 off blanking front piece for base cabinet space 200Wx720H. 2 off cabinet end panels 870Hx600D 1 off 1650L of cabinet plinth. 1 off 1050L of cabinet plinth. 1 off 1700L of cabinet plinth 1 off 1200L of cabinet plinth Note: All cabinet doors, drawer fronts and end panels are to be 2 pack (thermoformed) gloss white in a flat profile. Plinth colour to match. Note: All cabinet “boxes” to be delivered assembled without doors or drawers. Cabinet adjustable feet to be supplied. Wall Cabinets: 2 off slimline wall cabinets 600Wx300Dx360H with 2 x 300mm doors each cabinet. 1 off single door wall cabinet 300Wx700Hx300D. 1 off Range Hood cabinet 600Wx300Dx600H (for 600mm slide out rangehood). 1 off single door wall cabinet 400Wx300Dx700H. 1 off slimline wall cabinet single door 600Wx300Dx360H. 1 off wall cabinet end panel 300Dx700H. Note: All cabinet doors and end panels are to be 2 pack (thermoformed) gloss white in a flat profile Note: All cabinet “boxes” to be delivered assembled without doors. Benchtops: 1 off 2100Lx600W single postformed long edge (tight radius) with one end (LHS) with edge strip and other end (RHS) with female joint. 1 off 2250Lx600W single postformed long edge (tight radius) with one end (LHS) male joint and other end with edge strip. 1 off 1200Lx600W single postformed long edge (tight radius) with both ends with edge strips. 1 off 1440Lx900W double postformed long edges (tight radius) with both ends with edge strips. 2 off 870Hx900W double postformed long edges (tight radius) with both ends with edge strips. Note: All benchtops to be tight radius (not bullnose) profile in a grey riverstone matt finish laminate and to include jointing kit for nominated joint.

To fit two ovens into tower (and add a shelf between them) and to paint the cupboards. To remove old cooktop and fit a new cooktop for plumber to install. (We have an electrician and a plumber to... To fit two ovens into tower (and add a shelf between them) and to paint the cupboards. To remove old cooktop and fit a new cooktop for plumber to install. (We have an electrician and a plumber to do the connections.)

To fit two ovens into tower (and add a shelf between them) and to paint the cupboards. To remove old cooktop and fit a new cooktop for plumber to install. (We have an electrician and a... To fit two ovens into tower (and add a shelf between them) and to paint the cupboards. To remove old cooktop and fit a new cooktop for plumber to install. (We have an electrician and a plumber to do all the connections.)

couple burn marks couple burn marks

We have a tile topped outdoor rectangular iron framed table. We would like to reduce the size of the table. We need a welder for this job We have a tile topped outdoor rectangular iron framed table. We would like to reduce the size of the table. We need a welder for this job

move existing kitchen cabinets (pantry and oven) to increase space for a new fridge. new ovens have also been installed and the cabinet needs to be altered/replaced. move existing kitchen cabinets (pantry and oven) to increase space for a new fridge. new ovens have also been installed and the cabinet needs to be altered/replaced.

Replaced my old oven, but new oven is 3cm smaller in height. Would like the gap filled with the same wood as the rest of the kitchen Replaced my old oven, but new oven is 3cm smaller in height. Would like the gap filled with the same wood as the rest of the kitchen

Walk up corner bar project. Have basic design plan but could do with further advise Walk up corner bar project. Have basic design plan but could do with further advise

need a caesarstone benchtop for a galley style kitchen. approx 3600 x 900 and 2 1800 x 600 (returns) pieces in linen colour. possibly want waterfall on returns need a caesarstone benchtop for a galley style kitchen. approx 3600 x 900 and 2 1800 x 600 (returns) pieces in linen colour. possibly want waterfall on returns

replace an 800 mm freestanding oven with 900 mm oven. space has laminate benchtop and 3 wooden drawers on each side which will need adjusting. replace an 800 mm freestanding oven with 900 mm oven. space has laminate benchtop and 3 wooden drawers on each side which will need adjusting.

frameless mirrors as the ward robe has an architrave around it. The wardrobe is 2m wide by 2.15 m high. frameless mirrors as the ward robe has an architrave around it. The wardrobe is 2m wide by 2.15 m high.

2 caeserstone benchtops of approx 600mm x 400mm in size. need samples colours if possible. kitchen cabinets are in place. 2 caeserstone benchtops of approx 600mm x 400mm in size. need samples colours if possible. kitchen cabinets are in place.

water damaged cupbaord needs replacing water damaged cupbaord needs replacing

Facelift - supply & replace kitchen benchtop & cuboard doors. replace hotpate & cooking hood. Facelift - supply & replace kitchen benchtop & cuboard doors. replace hotpate & cooking hood.

Replace benchtops & exterior cupboards in kitchen & bench in bathroom Replace benchtops & exterior cupboards in kitchen & bench in bathroom

A CABINET MAKER TO BUILD A NEW KITCHEN. THE KITCHEN WILL NEED TO BE FITTED AS WELL. A CABINET MAKER TO BUILD A NEW KITCHEN. THE KITCHEN WILL NEED TO BE FITTED AS WELL.

Build a wall unit in my study apprx 2040mm high by 1950mm wide combining cupboards and shelves in emporite or a plain finish laminate or equivalent. Shelf depth of 350mm, cupboard depth 470mm. Build a wall unit in my study apprx 2040mm high by 1950mm wide combining cupboards and shelves in emporite or a plain finish laminate or equivalent. Shelf depth of 350mm, cupboard depth 470mm.

PUT A CUPBOARD DOOR ON TO WHERE THE MICROWAVE USED TO SIT PUT A CUPBOARD DOOR ON TO WHERE THE MICROWAVE USED TO SIT

MAKE 3 NEW CUPBOARD DOORS TO EXISTING BUILT IN FURNITURE. MAKE 3 NEW CUPBOARD DOORS TO EXISTING BUILT IN FURNITURE.