Manufacture Kitchen Cabinets and Bench Tops

• Cabinet Making
→
• New Kitchen Cabinets
→
• Cabinet Makers Quote Request #521541

Stephen requested 3 quotes from Cabinet Makers in Vermont South

  Manufacture and delivery of components as listed below:

Floor Base Cabinets:
1 off Fridge Cabinet 2200Hx800Wx600D including slimline wall cabinet 800Wx360H above fridge space.
1 off Corner Pantry unit 2200Hx1000Wx1000W (single door 600W).
1 off Oven Tower unit (for 890mm double oven) 2200Hx600Wx600D with slimline wall cabinet 360H plus microwave box 430H plus single drawer unit 300H.
2 off tall end panels 2200Hx600D.
1 off three (3) drawer base cabinet 900Wx600Dx720H.
1 off single door base cabinet 300Wx600Dx720H.
1 off 2 door Corner base cabinet 900Wx900Wx720H.
1 off double door base cabinet 600Wx600Dx720H.
1 off single (300mm) door blind corner base cabinet 600Wx600Dx720H.
2 off three (3) drawer base cabinets 600Wx600Dx720H.
1 off blanking front piece for base cabinet space 200Wx720H.
2 off cabinet end panels 870Hx600D
1 off 1650L of cabinet plinth.
1 off 1050L of cabinet plinth.
1 off 1700L of cabinet plinth
1 off 1200L of cabinet plinth

Note: All cabinet doors, drawer fronts and end panels are to be 2 pack (thermoformed) gloss white in a flat profile. Plinth colour to match.
Note: All cabinet “boxes” to be delivered assembled without doors or drawers. Cabinet adjustable feet to be supplied.

Wall Cabinets:
2 off slimline wall cabinets 600Wx300Dx360H with 2 x 300mm doors each cabinet.
1 off single door wall cabinet 300Wx700Hx300D.
1 off Range Hood cabinet 600Wx300Dx600H (for 600mm slide out rangehood).
1 off single door wall cabinet 400Wx300Dx700H.
1 off slimline wall cabinet single door 600Wx300Dx360H.
1 off wall cabinet end panel 300Dx700H.

Note: All cabinet doors and end panels are to be 2 pack (thermoformed) gloss white in a flat profile
Note: All cabinet “boxes” to be delivered assembled without doors.

Benchtops:
1 off 2100Lx600W single postformed long edge (tight radius) with one end (LHS) with edge strip and other end (RHS) with female joint.
1 off 2250Lx600W single postformed long edge (tight radius) with one end (LHS) male joint and other end with edge strip.
1 off 1200Lx600W single postformed long edge (tight radius) with both ends with edge strips.
1 off 1440Lx900W double postformed long edges (tight radius) with both ends with edge strips.
2 off 870Hx900W double postformed long edges (tight radius) with both ends with edge strips.

Note: All benchtops to be tight radius (not bullnose) profile in a grey riverstone matt finish laminate and to include jointing kit for nominated joint.