Repair part of fascia

Quentin requested 3 quotes from Carpenters in Rosanna

  A 2m section of fascia in front of a box gutter has fallen off and needs to be re-installed.
use nail-gun to add new 2x4 timber scab blocks onto ends of 2 or 3 old rafters,
remove existing damaged section of soffit lining (approx 2m x 700mm), replace with new piece of cement sheeting. may require repairing/replacing some battens to soffit
re-install (nail) a fallen 2m length of approx 350mm deep canted timber fascia onto rafters/scab blocks.
fascia has groove in backside to carry soffit lining.
re-nail strip of galv sheeting that joins this fascia section to the next section.
no painting required.
fascia section is on front corner of a 2-storey house, approx 4m above a sloping ground surface (woodchips, approx 1 in 5 slope). job will require an adjustable scaffold with good bracing.

Carpenters that Responded

Mode Decor

The Golden Eagle Design & Construction

Quote Details

  • Suburb Rosanna, VIC 3084
  • Specialisation Fascia replacement
  • Date Listed 16 Feb 2019 - 9:44 pm

Similar Quote Requests

Fascia board fix
Need to remove old damaged fascia boards and replace with new one

FRAMEWORK FOR ABOVE GROUND POOL
Require a quote for a framework to be created on an above ground pool to put...

Decking to back of house
Decking from side to back of house with posts added for a screen. All treated...

Pergola & decking
Allan requires quotes for decking and a pergola with and without materials.