Carpentry Quotes
from local carpenters
Replace Front Door Frame and Glass. Trim bottom of Sliding Door
Travis requested 3 quotes from Carpenters in Ringwood North
The frame for which our front door locks into needs replacing as it was too thin and the hole for the lock broke. As a result the security door cannot be locked. We would also like the glass windows in this side panel to be replaced to match the frosted glass in our new door. Once the frame has been replaced we will need new holes dug into the frame so both the front door and security door can be locked. It is a struggle to lock the front door also since the hole for the lock is not exactly aligned.
We also need to have the bottom of the sliding door in our front door entrance to be trimmed as we recently had floating floor laid and the sliding door doesn't slide over the cover between floating floor and carpet.
Quote Details
- Suburb Ringwood North, VIC 3134
- Specialisation General Carpentry
- Date Listed 7 Mar 2016 - 9:09 am
Similar Quote Requests
Exterior cladding
small extension 4 walls to clad in weathertex type material
One and half internal walls removed (all up roughly 7 m wide by 2.5 m high)
remove approx 3 m x 2.5of wall separating hall from living area. remove wall...
Carpentry work, screening on deck
Construction of a timber screen on our pre-existing deck, in conjunction with...
Replace Rear Door.
Use existing hardware. Paint to match existing.
Carpentry Quotes
from local carpenters
