Brent requested 3 quotes from Electricians in Fawkner
We need two ceiling pendant lights removed and replaced with new ones (we have the new ones).
One is a straight pendant light swap. Should be simple.
The other is swapping a single pendant light with one that splits into three pendant lights like this: http://www.lightingmajestic.co.uk/3lt-suspension-plate-antique-brass-for-shade-sof8629.html
Inside that plate is just the three wires, one for each light, , so you'll need to join them together somehow to attach to (presumably) one set of wires that is currently attached to the single light. Looks like you'll need to bring some wire and some kind of splitter or joiner, or whatever you call them.
Finally, I need some advice on an inside switch that powers some outside lights that have been removed (not all have been removed, --some are still active). Its currently not attached to the switch, but would like to reattach it to make the remaining outside lights usable.
Thanks!
Joseph Grech Electrical Service
Radge Electrical
Voodoo electrics
Light fixture replacing and/or plastering
Need three down light fixtures replacing as bulbs keep blowing. If possible,...
Install hanging light fitting and dimmer switch
To install a light fitting that will hang in a dining room space from a...
Replace existing lights and install new lights
I want to replace 3 ceiling lights with new pendant lights, add a new pendant...
Air conditioner installation
Installation of split system air conditioner