Jobs Board Excavation Jobs in Brunswick Excavation Jobs in Brunswick

In the front yard I have a mound of clean fill that is about 8 - 10 cubic metres. There is also about 1.5 - 2 cubic metres of general waste. This material needs to be removed, before the earth for... In the front yard I have a mound of clean fill that is about 8 - 10 cubic metres. There is also about 1.5 - 2 cubic metres of general waste. This material needs to be removed, before the earth for the proposed driveway can be dug out. The amount size of this excavation is 2.4 metres wide and approximately 11.7 metres long. The depth of excavation is to be 150mm deep from the natural surface. Access is from the front double gates and this job would suit someone who has a small dingo and truck. I have taken photos of the job and these can emailed to you if you wish to see the extent of the job. The main gas supply runs down the center of the driveway and this will be marked out prior to any excavation taking place. The successful bidder must have all relevant insurances.

Take away approx. 10m3 - 12m3 of (clean fill) dirt from front garden plus scrape/excavate a top layer (approx. 100mm - 200mm) from the front garden and front driveway (approx. total area 70m2)... Take away approx. 10m3 - 12m3 of (clean fill) dirt from front garden plus scrape/excavate a top layer (approx. 100mm - 200mm) from the front garden and front driveway (approx. total area 70m2) equal to approx. to another 8m3 - 11m3 of dirt. Need a man/operator with no bigger than a 1.5 tonne excavator and as large a truck as possible (ideally capable of carrying in excess of 6m3+ of dirt).

Located Brunswick need to hire a dingo for 8 hour hire to move soil. Please text me a price ONLY Located Brunswick need to hire a dingo for 8 hour hire to move soil. Please text me a price ONLY

I need approximately 40 stump holes bored for a house extension. 24 perimeter holes 450 to 500mm diameter by 1m deep and remaining 16 holes are 350mm diameter by 1m deep. Access is limited to... I need approximately 40 stump holes bored for a house extension. 24 perimeter holes 450 to 500mm diameter by 1m deep and remaining 16 holes are 350mm diameter by 1m deep. Access is limited to 1300 mm maximum machine width. Prefer auger with dispersing blade so that area surrounding holes is clear to about 200mm outside them for ease of stump placement, concrete pouring and safety.

need approximately 40 stump holes bored for a house extension. 24 perimeter holes 450 to 500mm diameter by 1m deep and remainder 16 holes under floor 350mm diameter 1m deep. access limited to... need approximately 40 stump holes bored for a house extension. 24 perimeter holes 450 to 500mm diameter by 1m deep and remainder 16 holes under floor 350mm diameter 1m deep. access limited to 1300 mm maximum width. prefer auger with dispersing blade so that area to approx 200mm material surrounding holes are clear.

The job is at Brunswick hospital front carpark lights. need post holes 1 metre deep,450mm wide or close to it. Also a saw cutter required to remove asphelt for one of the holes. The job is at Brunswick hospital front carpark lights. need post holes 1 metre deep,450mm wide or close to it. Also a saw cutter required to remove asphelt for one of the holes.