Fencing And Gates Quotes
from local businesses
Manual swing driveway/pedestrian gate fabrication and installation
Steve requested 3 quotes from Fencing And Gates Professionals in Cannington
A double swing gate fabricated and installed for the end of a single car driveway.
Either steel framed with timber cladding, colorbond, steel slat or timber picket.
Total width of the opening is 3000mm.
Preferred gate height of 1600mm.
I want one gate to measure 1000mm (approx) for pedestrian access and the other to be 2000mm (approx) which would only be opened when driving a vehicle through to the rear of the property.
Smaller gate can be supported by the brick house, the larger gate would need it's own post.
Gates must open outwards and I would like to be able to install a locking latch system.
Quote Details
- Suburb Cannington, WA 6107
- Specialisation Timber Gates
- Date Listed 24 Jan 2009 - 10:42 pm
Similar Quote Requests
Supply & Install Colour bond fencing, new house in Canning Vale
Supply and install:
Back fence (2m in length) colour bond.
A colour...
Fencing
Replace broken fence.approx. 30 sheets required
Remove and Replace Fencing
I have 5 hardie fence sheets that I need removed and replaced down the side...
Require fencing quote for colourbond @ approx 68 metres including install
looking at quotes on a colourbond fence including installation about 68m in...
Fencing And Gates Quotes
from local businesses
