Luc requested 3 quotes from Heating Professionals in St Andrews
We will need following done:
Remove current wood heater (Yunca Monte), flue kit and solar HWS (Red Circle).
Install Gourmet Cooker wood heater 5 kW boiler, splashback and circulation pump
Install new flue kit.
Install WiseLiving solar HWS (30 tubes) and 315 liters Hot Water Tank (Outside under eaves on concrete floor). Connect electric heater element to the storage tank.
Maybe we will need to install a kit to adjust the evacuated tubes to the correct angle. (Not sure).
Install small towel heater on the feed line in bathroom
Single storey house, only 4 years old. Colorbond roof, pitch 25 degrees. House is only 120 square meters. No carpet, everything tiled. Plenty of space.
We are looking for a reliable and experienced plumber.
This is a breakdown of all parts. Check out www.wiseliving.com.au for pictures.
Flat White Towel Rail 600x1172
Fittings:
Pump and unions, clamp on thermostat, ½” radiator valve, ½” angled lockshield (2),
½” copper pipe adaptor (4), anti-corrosive fluid, 12 litre header tank with swing check
valve, drain tray. No pipe allowed for. Assumed copper pipe to be supplied by
installer.
Gourmet cooker with 5kw boiler.
Splashback.
Flue kit consisting of: 1x2m 6” flexible flue, 1xstarter no mesh, 1x1m triple skin, 1x
ceiling ring, 1x cap, 1x #8 Aquaseal.
Wiseliving PS315 SQ FC Centracoil tank with stove and solar connections and electric
element.
Wiseliving 30S-SET evacuated tube solar system with controller and low energy pump.
Flat roof stand if required.
Wood heater install
Wood heater installation. Indoor with flue.
Install glue to my wood heater
Glue installed on Scandia wood fire
Wood heater installed
Replace existing wood heater
A flue installed for a Conaara wood heater. I have some parts already.
Install a flue into a garage for a Conaara wood heater.